The Inspector EXP was designed for the requirements of emergency response personnel. It has the same valuable features, small size, and quality of the Inspector, but instead of the built-in detector, it has the added versatility of an external probe. The carrying case has a clear window panel providing full view of the readout, count light, and access to the switches. Convenient hand straps and a belt loop are provided for carrying the instrument. A small pocket is provided for a check source. The unique design of attaching the probe to the carrying case allows one-handed operation if desired. The protective probe cover folds easily out of the way during one-handed operation.
Specifications
Inspector+ EXP (External probe):
RAP-RS1 Probe:
Same GM tube as Inspector+. Anodized aluminum housing with coated, black foam grip.
500-volt power supply is in the probe head.
Size- Approx. length: 22.2 cm (8.75 in.) Diameter: 7 cm (2.75 in.)
Connector - Amphenol tuchel connectors
Display:
4 digit liquid crystal display with indicators. Averaging Periods:
Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases. Operating Range:
mR/hr - .001 (1µR) to 100 mR/hr
µSv/hr - .01 to 1000
CPM - 0 to 350,000
CPS - 0 to 5000
Total/ Timer - 1 to 9,999,000 counts Accuracy:
mR/hr ±10% typical (NIST), ±15% max - 0 to 100
µSv/hr ±10% typical (NIST), ±15% max - 01 - 1000
CPM ±10% typical (NIST), ±15% max - 0 to 350,000
(Referenced to Cs-137) Alert Set Range:
mR/hr .001 - 50 and CPM 1 - 160,000 Gamma Sensitivity:
3500 CPM/mR/hr referenced to Cs-137. Smallest detectable level for I-125 is .02 µCi at contact.
Timer:
Can set 1 minute sampling periods from 1 to 10 min Count Light:
Red LED flashes with each radiation event. Audio Indicator:
Internally mounted beeper (can be switched off for silent operation) Outputs:
Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration Anti-Saturation:
Meter will hold at full scale in fields as high as 100 times the maximum reading. Power Requirements:
One 9-volt alkaline battery. Battery life is 2160 hours at normal background. Temperature Range:
-10ºC to 50ºC (14ºF to 122ºF) Weight:
Inspector: 880.2 grams (28.0 oz.) without battery. Size:
150 x 80 x 30 mm (5.9 x 3.3 x 1.2 in.).
Utility Menu:
The Utility Menu offers several options accessible by holding down the + button while turning the instrument on.
3 second (fast response)
Switches from mR/hr and CPM to µSv/hr and CPS
Reset the cal factor to 100.
Probe adjustment settings.
Adjust the CAL factor.
Reset all setting to original factory setting (default).
Includes:
Carrying Case, Cable for Inspector+ EXP: 42-inch Beldon 9853 with Amphenol 31226 twinax.
SHIPPING TIMES:
Most, but not all orders leave our warehouse within 1-7 business days. Allow time from the day we ship for UPS or the USPS to deliver it to you from Upstate NY. Please call for rush orders before 2:00 Eastern time. That means that some items, to some locations could take two weeks or more. Remember, we're a 50 year old family run business, so feel free to call us for a rush. We can get most of our items out the same day and use next day air and get it to you tomorrow, but you need to call before 2:00 Eastern time.